PVC window machine PVC UPVC window frame production machine

Models and parameters of PVC window machine PVC UPVC window frame production machine:

Required materials for PVC UPVC window door profiles production: 

1. PVC resin
2. calcium carbonate
3. stabilizer
4. Stearic acid
5. CPE
6. PE wax
7. ACR
8. pigment or whitener

UPVC window door profiles are mainly used in the application of sliding, casement doors and windows, guardrails, pipes and ceiling materials in housing construction. They are also widely used in automobile engine protection panels through new process processing. They are not only light in weight, but also have good toughness. It has the excellent properties of rigidity, and is sometimes called alloy plastic steel.
The reason why plastic-steel profiles can be widely applied and gradually replace wooden and aluminum doors and windows is inseparable from its unique advantages. Compared with aluminum and wooden doors and windows, plastic steel doors and windows have the following advantages:
1. The price is cheap. The price of plastic is much lower than that of aluminum with the same strength and life. This advantage is more and more obvious due to the sharp rise in the price of metal.
2. Rich colors: The application of colored plastic steel profiles adds a lot of beauty to the building. In the past, wooden doors and windows were used. In order to achieve the harmony between the doors and windows and the appearance of the building, paint was sprayed on the surface of the doors and windows. The paint is easily aged and peeled off when exposed to ultraviolet rays. It will change beyond recognition within a few years, which is very inconsistent with the life of the building. Later, colored aluminum doors and windows were invented, but the price was expensive and ordinary consumers could not afford it. The use of plastic doors and windows solves this problem, and the color film profiles can even make a fake wood grain effect.
3. Durability: adding reinforced steel in the profile cavity greatly improves the strength of the profile, and has the effects of shock resistance and wind erosion resistance. In addition, the multi-cavity structure of the profile and the independent drainage cavity prevent the water from entering the reinforced steel cavity, avoid the corrosion of the steel, and improve the service life of the doors and windows. The addition of anti-ultraviolet components also improves the weather resistance of plastic-steel profiles, and can be used with confidence even in tropical areas with strong ultraviolet rays.
4. Good thermal insulation performance: The thermal conductivity of the plastic-steel profile itself is far less than that of the aluminum profile, and the design of the multi-cavity structure has achieved the effect of thermal insulation. Studies have shown that the indoor temperature of the same type of room using plastic steel doors and windows in summer is 5-7 ℃ lower than that of aluminum doors and windows, and it is 8-15 ℃ higher in different regions in winter.
5. Good sound insulation performance: The sound insulation performance of plastic steel doors and windows with well-sealed insulating glass is good. Sound insulation has become the main condition for choosing doors and windows, especially for residential buildings in downtown areas. The plastic steel doors and windows are assembled by welding process, coupled with the closed multi-cavity structure, the noise barrier effect is very obvious.

Main features of PVC window machine PVC UPVC window frame production machine: 

1. Adopts ABB inverter, SIMENS motor, SCHNEIDER contactors, all famous international brand, it makes the maintaining easier and faster everywhere. You can also choose to use PLC control if you prefer.
2. Aluminum heater for the mold is adopted, makes heating more stable and efficient.
3. Long and big calibration table with powerful cooling&calibration function, makes running speed faster.
4. Dust collector can be optional for cutting machine, makes production environment more clean and healthy.
5. Stacker with sensor, control cutting machine automatically.