PVC pulverizer machine with dust collector
PVC pulverizer machine capacity ranges from 80kg-700kg per hour.
PVC pulverizer machine capacity ranges from 80kg-700kg per hour.
PVC pulverizer machine was formed in the early 1980s and has been continuously improved and updated. It has been in use until now. The model has evolved from SMF-400 to SMF-500, SMF-600, and SMF-800. Significant improvements have been made in the past, and the output of SHARC’s plastic pulverizer has also increased from the initial dozens of kilograms to hundreds of kilograms or even nearly 1 ton per hour, and the fineness has also developed from a fixed number to an adjustable one.
PVC pulverizer machine adopts rotor blade design to pulverize waste PVC material into power for recycling. It is widely used for recycling waste PVC/WPC panel, PVC/WPC profiles, PVC pipe, PVC sheet&board and so on.
The basic principle of PVC pulverizer machine is through spindle equipped with precision bearing drive the knife dish, under the drive of the knife dish, the moving knife rotated with high speed, and tangent with the stationary knife. Make the materials into a powerful collision, then grinding into powder. After the wind and water cooling, it can effective control the temperature of grinding material,
Main Features of PVC pulverizer machine:
Main Parameters of PVC pulverizing machine:
Model | SMF-400 | SMF-500 | SMF-600 | SMF-800 |
Main Motor Power(kw) | 30 | 37 | 45 | 90 |
Capacity(kg/h) | 50-120 | 150-200 | 280-380 | 500-700 |
Weight (kg) | 1000 | 1200 | 1800 | 1900 |
Output Fineness | 30-80 mesh adjustable | |||
Cooling | Wind Cooling + Water Cooling |
As the organization managers and operators of industrial plastic pulverizer and other pulverizer machines, they should: pay attention to ensure that the machinery is prevented from damage, deformation, corrosion, etc. during transportation and storage; Good technical status; to educate operators on the correct use and operation of various construction machinery, reduce and prevent mechanical failures caused by human errors; to maintain machinery carefully, to perform regular and irregular maintenance correctly and reasonably, to keep the machinery in good condition. Clean and clean, regularly check the technical status of the machinery, deal with any abnormality in time, tighten and adjust the loose and out-of-balance parts in time, and carry out preventive replacement of some wearing parts.
2022 © All rights reserved | Sitemap