PVC ceiling panel extruder machine extrusion line
PVC ceiling panel extruder machine extrusion line adopts original SIMENS motors, Original ABB inverter and all international brands electronics
PVC ceiling panel extruder machine extrusion line adopts original SIMENS motors, Original ABB inverter and all international brands electronics
Process of PVC ceiling panel and wall panel manufacturing process:
Step 1 is raw materials mixing and feeding process:
This process mix raw materials according to formula, it can be semi-automatic and fully automatic, we can design this feeding system according to clients’ capacity and other clients factory status.
Step 2 is PVC ceiling panel extrusion process:
By this step, clients can can get all sizes PVC ceiling panels, clients can get all design panels. To get design, basically there are 3 ways: hot stamping machine, offline printing machine and lamination machine.
Step 3 is recycling process:
This step is helpful to reduce the production cost for clients, during PVC ceiling panel making process, sometimes there is waste products, if we don’t recycle them, it will occur wastage and increase clients’ production cost, therefore we need this recycling process. It mainly includes PVC crusher and PVC pulverizer.
Components of PVC ceiling panel extruder machine extrusion line:
Main Features of PVC ceiling panel extruder machine extrusion line:
1. Extruder adopts PVC ceiling panel dedicated screw, make sure best plasticizing effect, further make sure best final product shape
2. Extruder speed and haul off speed of my PVC ceiling panel machine controlled by ABB frequency inverter, it saves power and makes speed adjustment easy.
3. Extruder temperature of my PVC panel machine adopts PID control, temperature fluctuation self adjusting, it realize the high automatic level
4. The amount of filled calcium can be from 50phr to 250phr,easy to control product cost and quality.
5. My PVC panel making machine is equipped with infrared tracking device which can eliminate the problem of fluctuation of extrusion flow rate, further can make sure get best product
6. Lower power consumption, it can save 25-30% electricity power consumption comparing with most same kind PVC ceiling wall panel machine.
Main models and Technical parameters of PVC ceiling panel extruder machine extrusion line:
Model | 48/51 | 53/55 | 65 | 80 |
Applicable product width(mm) | <300 | <400 | 200-603 | >200 |
Extruder | SJSZ48/113 or SJSZ51/105 | SJSZ55/110
Or SJSZ53/128 |
SJSZ65/132
Or SJSZ65/138 |
80/156 |
Capacity (m2/24hour) | 800-1200 | 1600 | 2400 | 3600 |
2022 © All rights reserved | Sitemap