china supplier 200-800mm PVC pipe making machine

1. screw feeder (change motor size according to extruder output),
2. Conical twin extruder (adjusted according to the size of the pipe envisaged to produce and the production liner speed),
3. Mould (small-sized tubes can be double-out or even 4-out, large-sized tubes are normally single-out),
4. The vacuum tank water tank adjusts the specific configuration according to the pipe size and wall thickness,
5. Cutting machine (with chamfering machine) can also be dust-free cutting,
6. The tractor can be one-claw two-claw, three-claw, etc. It can also be controlled independently.
reprint.
7. Pipe socketing(belling) machine can be divided into R mouth and U mouth. The cooling method can also be divided into air cooling and water cooling.

PVC pipes are widely used in the industry, and PVC pipes are also very popular in the market. There are also many types of PVC pipes, which makes consumers unclear when purchasing. The following will introduce the classification of PVC pipes.
PVC pipes are divided into PVC water supply pipes, PVC drainage pipes, PVC threading pipes, and PVC irrigation pipes. According to the material, it is divided into: PVC-U (unplasticized PVC), C-PVC (chlorinated PVC), PVC-O (molecularly oriented PVC), high impact PVC (PVC-HI).
Besides sharing many of the same properties (such as safety, durability, sustainability, and recyclability), each type of PVC has its own advantages for different applications.
UPVC, also known as rigid PVC, is an amorphous thermoplastic resin composed of vinyl chloride monomers and certain additives (such as stabilizers, lubricants, fillers, etc.). In addition to the use of additives, the method of mixing with other resins is also adopted, which makes it have obvious practical value. These resins are CPVC, PE, ABS, EVA, MBS and so on. UPVC has high melt viscosity and poor fluidity. Even if the injection pressure and melt temperature are increased, the flowability will not change much. In addition, the molding temperature of this resin is very close to the thermal decomposition temperature, and the temperature range that can be molded is very narrow, making it a difficult material to mold.

Main features of 200-800mm PVC pipe making machine: 

1. The screw is suitable for high calcium and low calcium and foaming.
2. The vacuum box can be used as a negative pressure vacuum to increase the output, spray (6m one true two water, motor 37/45kw for 65/132 extruder, 55/75kw for 80/156 extruder), plus a spray box for large pipes, small Pipes are normally not required. Made of stainless steel, the sprinkler head is a new material (high pressure and good atomization effect) high pressure sprinkler head.
3. Traction hard tooth surface, K series gearbox (or use servo motor), independent drive motor, stable and durable (big pipes are driven independently, small pipes are integrated)

4. The large pipe of the cutting machine is circularly cut (it is recommended that the circular cutting has low failure rate, strong stability, and easy maintenance), or no dust cutting machine((for small diameter pipes).). The cutting machine is equipped with a chamfering device.

5. The internal stepped structure of vacuum forming and cooling is convenient for operation when producing pipes of different diameters.
6. Vacuum tank water level control Liquid level control, automatic drainage. (The angle seat valve is automatically opened when the liquid level is full, and the drainage is also automatically drained) The solenoid valve controls the angle seat valve.

Main model and parameters of 200-800mm PVC pipe making machine: 

SHARC MACHINE is manufacturer of complete sets machines of making PVC pipes, for example PVC mixer, PVC crusher, PVC pulverizer and etc. Welcome for your kind inquiry.