automatic PVC pipe making machinery
PVC pipe machine from sharc machine co.,ltd has automatic operation system, PLC control system, reduce labor cost and increase efficiency
PVC pipe machine from sharc machine co.,ltd has automatic operation system, PLC control system, reduce labor cost and increase efficiency
The performance characteristics of PVC pipe:
1. For home decoration, some owners will choose PVC pipes as drainage pipes, which have better compressive performance, but are flexible. Compared with other plastic pipes, they are slightly less flexible. However, as a drainage pipe, because its resistance is relatively small, it is mainly due to the very smooth wall of the pipe, which reduces friction and is not prone to blockage.
2. If you choose PVC-U, because it is resistant to acid and alkali, and corrosion, it is not easy to be affected by the humid environment, and it is not easy to be affected by the acid and alkali of the soil layer, so it is not easy to corrode.
3. In addition, the water tightness of the PVC pipe is also very good. Whether it is pasted or interfaced, it can ensure good sealing performance.
4. However, there are also defects. For example, it cannot be used as a hot water pipeline, but can only be used as a cold water water supply, and cannot be directly used as a drinking water supply pipe, because the flexibility is relatively poor and it is easy to crack.
1. screw feeder (change motor size according to extruder output),
2. Conical twin extruder (adjusted according to the size of the pipe envisaged to produce and the production liner speed),
3. Mould (small-sized tubes can be double-out or even 4-out, large-sized tubes are normally single-out),
4. The vacuum tank water tank adjusts the specific configuration according to the pipe size and wall thickness,
5. Cutting machine (with chamfering machine) can also be dust-free cutting,
6. The tractor can be one-claw two-claw, three-claw, etc. It can also be controlled independently.
reprint.
7. Pipe socketing(belling) machine can be divided into R mouth and U mouth. The cooling method can also be divided into air cooling and water cooling.
Main features of PVC pipe making machinery:
1. The screw is suitable for high calcium and low calcium and foaming.
2. The vacuum box can be used as a negative pressure vacuum to increase the output, spray (6m one true two water, motor 37/45kwfor 65/132 extruder, 55/75kw for 80/156 extruder), plus a spray box for large pipes, small Pipes are normally not required. Made of stainless steel, the sprinkler head is a new material (high pressure and good atomization effect) high pressure sprinkler head.
3. Traction hard tooth surface, K series gearbox (or use servo motor), independent drive motor, stable and durable (big pipes are driven independently, small pipes are integrated)
4. The large pipe of the cutting machine is circularly cut (it is recommended that the circular cutting has low failure rate, strong stability, and easy maintenance), or no dust cutting machine((for small diameter pipes).). The cutting machine is equipped with a chamfering device.
5. The internal stepped structure of vacuum forming and cooling is convenient for operation when producing pipes of different diameters.
6. Vacuum tank water level control Liquid level control, automatic drainage. (The angle seat valve is automatically opened when the liquid level is full, and the drainage is also automatically drained) The solenoid valve controls the angle seat valve.
Main model of 20-63mm PVC pipe making machinery:
Model | PVC-63 | PVC-110 | PVC-160 | PVC-250 | PVC-315 | PVC-450 | PVC-630 | PVC-800 |
Applicable OD(mm) | 16-63 | 20-110 | 50-160 | 75-250 | 110-315 | 200-450 | 315-630 | 500-800 |
Extruder model | 55/110 | 55/110 | 65/132 | 80/156 | 80/156 | 92/188 | 92/188 | 105/216 |
Capacity (kg/h) |
150 | 180 | 250 | 350 | 400 | 600 | 750 | 1300 |
SHARC MACHINE is manufacturer of complete sets PVC pipe machine, for example PVC mixer, PVC crusher, PVC pulverizer and etc. Welcome for your kind inquiry.
2022 © All rights reserved | Sitemap