The Winding machine is one of the important equipment in the PVC edge banding production line, it is used to wind up the newly produced PVC edge banding for easy storage and transportation. The following is a brief introduction about PVC edge strip winder.
The Winding machine is one of the important equipment in the PVC edge banding production line, it is used to wind up the newly produced PVC edge banding for easy storage and transportation. The following is a brief introduction about PVC edge strip winder.
PVC Edge Banding Tape Winders Machine usually consists of the following main parts:
1. Winding device: The winding device is responsible for winding the PVC edge banding into a reel. It usually consists of a pair of reels, which are driven by a motor to achieve the winding function. The reel can adjust the winding tension to ensure that the winding effect is even and will not cause damage to the PVC edge banding.
2. Tension control system: The tension control system is used to control the tension of the reel to ensure that the PVC edge banding maintains proper tension during the coiling process. This helps prevent tight or loose coils and maintains the quality of the spool.
3. Control system: The PVC Edge Banding Tape Winders Machine is equipped with a control system for monitoring and regulating the whole winding process. The operator can set and control the winder through the touch screen or buttons, and obtain relevant production data.
4. Safety device: In order to ensure the safety of the operator, the PVC Edge Banding Tape Winders Machine should also be equipped with some safety devices, such as protective cover, emergency stop switch, etc. These devices can reduce the occurrence of accidents and protect operators from dangerous elements.
The steps to use the PVC edge strip winding machine are as follows:
1. Send the produced PVC edge banding to the winder to ensure that the position of the edge banding is correct.
2. Set the winding tension and winding direction as required.
3. Start the winder and start to roll the PVC edge banding.
4. During the coiling process, check the tension of the reel and the coiling effect in time, and adjust it as needed.
5. Stop the operation of the winder when the PVC edge banding is fully wound onto the reel.
By using a PVC edge banding Winding machine, the produced edge banding can be quickly and efficiently wound into rolls for easy storage and transportation. This not only improves production efficiency, but also ensures the quality and appearance of PVC edge banding. At the same time, the safety device and control system of the winder can also ensure the safety of the operator and the controllability of the production process.
Welcome for your inquiry to ZHANGJIAGANG SHARC MACHINE CO.,LTD, we have the ability of offering complete solutions for clients including raw materials, installation and running, 7 by 24 hours technical support, designing layout and all necessary things of manufacturing business. So far we have provided plastic machines to more than 30 countries in the world.
2022 © All rights reserved | Sitemap
