PVC door panel board making machine

PVC door panel board making machine can be used for producing PVC door panel, PVC window sill, PVC kitchen cabinet board, hollow board etc

1. What is the pvc door panel? The chemical name of PVC material is polyvinyl chloride, a kind of plastic, and PVC is its English abbreviation. Polyvinyl chloride is a thermoplastic resin polymerized from vinyl chloride under the action of an initiator, a white or light-colored powder. For different purposes, PVC can exhibit different physical properties by adding different additives. PVC will begin to soften at 80~85℃, and it will become viscous flow state at 160~180℃, and its stability to light and heat is extremely poor. Everyone must know that plastic is flammable, but PVC is not.
2. The pvc door panel is flame-retardant, acid and alkali resistant, anti-microbial, wear-resistant and has good warmth retention and elasticity. For sound insulation and heat preservation, it is only relative, especially in terms of heat preservation, it can effectively prevent air convection.

Advantages of pvc door panels: The pvc door panel material has the advantages of light weight, waterproof, moisture-proof, moth-proof, easy installation, and low price, and after adding flame-retardant materials, it can be effectively extinguished after testing, and it is safer to use.

Normally the width of PVC door panel ranges from 500-1300mm. One set PVC door panel making machine can produce all these size panel. The capacity of machines ranges from 5-16 tons per day.

Models and main parameters of PVC door panel making machine:

Model	Extruder model	Main Motor (kw)	Working width	Capacity (kg/h)
SMC-65	65/132	37	0-600	150-200
SMC-80	80/156	55 or 75	0-1300	250-400
SMC-92	92/188	110kw	0-1300	500-600

One set PVC door panel board making machine mainly includes: 1. one set conical twin screw extruder, 2. one set water cooling and calibration table, 3. one set haul off machine, 4. one set cutting machine, 5. one set stacker……For mold(die), it is according to clients’ demand and will be customerized.

Features of PVC door board making machine:

Adopts ABB inverter, SIMENS motor, SCHNEIDER contactors, all famous international brand, it makes the maintaining easier and faster everywhere. You can also choose to use PLC control if you prefer, makes operation more easier.
Adopts super high quality screw and barrel for production, it is important
Mold is customerized and according to clients’ requirements.
Aluminum heater for the mold is adopted, makes heating more stable and efficient.
Long and big calibration table with powerful cooling&calibration function, makes running speed faster.
Dust collector can be optional for cutting machine, makes production environment more clean and healthy.
Stacker with sensor, control cutting machine automatically.

There is a big advantage of PVC door panel : It has so many design to be chosen, can meet different clients’ demand…To get these design, basically there are three ways: 1. use printing machine(main raw materials for this step are PVC ink&UV varnish ) 2. use hot stamping machine(main raw materials for this step are hot stamping foil and glue) 3. use lamination machine(main raw materials for this step are PVC film and glue).

SHARC MACHINE can supply complete machinery for making of PVC door board, also raw materials, machine installation, factory layout and whole process service can be provided.