10litter Lab mixing machine PVC mixer machine

Lab mixing machine is widely used in the production of various plastic industries because of its advantages of fast mixing, uniform mixture, good absorption of resin to plasticizer, easy operation of the machine, easy cleaning, sturdy and durable, and compact structure.

The mixing part of the lab mixer is a through-shaft single paddle. The angle design of the paddle on the single paddle is very reasonable and ingenious. When the single paddle rotates, the material rolls up and down, and at the same time, the paddle passes through the material and generates a certain angle of push to the left and right sides of the mixing tank. The squeezing force makes it impossible for the materials in any corner of the mixing tank to stand still, so that the materials can be mixed evenly.
This lab mixing machine adopts the sealing method of end face sealing, adjusting sealing nut and compensating axial pressure. Practice has proved that the effect is better. This machine can be used for timing stirring function, you only need to set the time before stirring, and it will automatically stop when the time comes. It not only saves energy, but also prevents safety accidents caused by the machine still running continuously after the operator leaves the machine.

Main models and parameters of lab mixing machine: 

We can supply many other model PVC mixer machines according to clients’ requirements. Welcome for your inquiry.

Our PVC mixer machine has below advantages:

1 .The hot-mixed liner is 10mm thick, and the bottom plate is 10mm thick [solid thickness, material SUS304, 2B, 10t]
2. Sealing method: [four skeleton seals]
3. Oil seal brand: [Taiwan TTO sealing ring]
4. Bearing brand: [Wafangdian General Factory]
5. Interlayer filler [10 thick] insulation cotton
6. Hot-mixing rack: using [25MM] thick panel
7. Three-way discharge valve [optional pneumatic three-way, pneumatic butterfly valve] butterfly idle three-way is not easy to leak powder or get stuck
8. Electrical appliances [Delixi, Tianzheng, Schneider] can be selected according to specific requirements
9. Frequency conversion [commonly used – Hailip, Robin Kang] can be selected according to specific requirements
10. High-mix motor [Jiangsu Lido Motor] can be selected according to specific requirements.